Section Width295 mm (11.6")
Aspect Ratio62%
Rim Diameter25"
Overall Diameter1001 mm (39.4")
Sidewall Height183 mm
Circumference3144 mm
295/62R25 — Buy Tires

Everything to know about the 295/62R25 tire size

Size geometry

A 295/62R25 tire has a 295mm section width and a 62% aspect ratio, mounted on a 25-inch rim. Sidewall height works out to 182.9mm (7.20") and overall outside diameter is 1000.8mm (39.40"). At highway speed the tire completes about 318 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 295/62R25 is unavailable, the closest same-diameter substitutes on the same rim are 285/64R25 and 305/60R25. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 295/62R25 you can upsize to 305/56R26 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 285/69R24 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 295/62R25 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 295/62R25

tire_size.no_vehicles_found