Section Width325 mm (12.8")
Aspect Ratio211%
Rim Diameter20"
Overall Diameter1880 mm (74.0")
Sidewall Height686 mm
Circumference5905 mm
325/211R20 — Buy Tires

Everything to know about the 325/211R20 tire size

Size geometry

A 325/211R20 tire has a 325mm section width and a 211% aspect ratio, mounted on a 20-inch rim. Sidewall height works out to 685.8mm (27.00") and overall outside diameter is 1879.5mm (74.00"). At highway speed the tire completes about 169 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 325/211R20 is unavailable, the closest same-diameter substitutes on the same rim are 315/218R20 and 335/205R20. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 325/211R20 you can upsize to 335/201R21 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 315/222R19 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 325/211R20 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 325/211R20

tire_size.no_vehicles_found