Section Width325 mm (12.8")
Aspect Ratio32%
Rim Diameter26"
Overall Diameter868 mm (34.2")
Sidewall Height104 mm
Circumference2728 mm
325/32R26 — Buy Tires

Everything to know about the 325/32R26 tire size

Size geometry

A 325/32R26 tire has a 325mm section width and a 32% aspect ratio, mounted on a 26-inch rim. Sidewall height works out to 104.0mm (4.09") and overall outside diameter is 868.4mm (34.19"). At highway speed the tire completes about 367 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 325/32R26 is unavailable, the closest same-diameter substitutes on the same rim are 315/33R26 and 335/31R26. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 325/32R26 you can upsize to 335/27R27 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 315/37R25 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 325/32R26 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 325/32R26

tire_size.no_vehicles_found