325/58R19 Tire Size Specifications
This tire size 325/58R19 fits 0 vehicles in our database.
Everything to know about the 325/58R19 tire size
Size geometry
A 325/58R19 tire has a 325mm section width and a 58% aspect ratio, mounted on a 19-inch rim. Sidewall height works out to 188.5mm (7.42") and overall outside diameter is 859.6mm (33.84"). At highway speed the tire completes about 370 revolutions per kilometre â your speedometer and odometer were calibrated against this number.
Direct substitute sizes
If 325/58R19 is unavailable, the closest same-diameter substitutes on the same rim are 315/60R19 and 335/56R19. Both keep your speedometer reading within 1% â safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.
Plus / minus sizing options
For a 325/58R19 you can upsize to 335/52R20 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 315/64R18 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.
Vehicle compatibility
0 vehicles in our database run the 325/58R19 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance â match these specs to your wheel before purchasing tires.
Vehicles Using 325/58R19
tire_size.no_vehicles_found