Section Width325 mm (12.8")
Aspect Ratio88%
Rim Diameter13"
Overall Diameter902 mm (35.5")
Sidewall Height286 mm
Circumference2834 mm
325/88R13 — Buy Tires

Everything to know about the 325/88R13 tire size

Size geometry

A 325/88R13 tire has a 325mm section width and a 88% aspect ratio, mounted on a 13-inch rim. Sidewall height works out to 286.0mm (11.26") and overall outside diameter is 902.2mm (35.52"). At highway speed the tire completes about 353 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 325/88R13 is unavailable, the closest same-diameter substitutes on the same rim are 315/91R13 and 335/85R13. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 325/88R13 you can upsize to 335/82R14 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 315/95R12 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 325/88R13 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 325/88R13

tire_size.no_vehicles_found