Section Width335 mm (13.2")
Aspect Ratio246%
Rim Diameter10"
Overall Diameter1902 mm (74.9")
Sidewall Height824 mm
Circumference5976 mm
335/246R10 — Buy Tires

Everything to know about the 335/246R10 tire size

Size geometry

A 335/246R10 tire has a 335mm section width and a 246% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 824.1mm (32.44") and overall outside diameter is 1902.2mm (74.89"). At highway speed the tire completes about 167 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 335/246R10 is unavailable, the closest same-diameter substitutes on the same rim are 325/254R10 and 345/239R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 335/246R10 you can upsize to 345/235R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 325/257R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 335/246R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 335/246R10

tire_size.no_vehicles_found