Section Width345 mm (13.6")
Aspect Ratio20%
Rim Diameter32"
Overall Diameter951 mm (37.4")
Sidewall Height69 mm
Circumference2987 mm
345/20R32 — Buy Tires

Everything to know about the 345/20R32 tire size

Size geometry

A 345/20R32 tire has a 345mm section width and a 20% aspect ratio, mounted on a 32-inch rim. Sidewall height works out to 69.0mm (2.72") and overall outside diameter is 950.8mm (37.43"). At highway speed the tire completes about 335 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 345/20R32 is unavailable, the closest same-diameter substitutes on the same rim are 335/21R32 and 355/19R32. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 345/20R32 you can upsize to 355/16R33 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 335/24R31 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 345/20R32 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 345/20R32

tire_size.no_vehicles_found