Section Width345 mm (13.6")
Aspect Ratio21%
Rim Diameter28"
Overall Diameter856 mm (33.7")
Sidewall Height72 mm
Circumference2690 mm
345/21R28 — Buy Tires

Everything to know about the 345/21R28 tire size

Size geometry

A 345/21R28 tire has a 345mm section width and a 21% aspect ratio, mounted on a 28-inch rim. Sidewall height works out to 72.5mm (2.85") and overall outside diameter is 856.1mm (33.70"). At highway speed the tire completes about 372 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 345/21R28 is unavailable, the closest same-diameter substitutes on the same rim are 335/22R28 and 355/20R28. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 345/21R28 you can upsize to 355/17R29 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 335/25R27 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 345/21R28 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 345/21R28

tire_size.no_vehicles_found