Section Width355 mm (14.0")
Aspect Ratio12%
Rim Diameter28"
Overall Diameter796 mm (31.4")
Sidewall Height43 mm
Circumference2502 mm
355/12R28 — Buy Tires

Everything to know about the 355/12R28 tire size

Size geometry

A 355/12R28 tire has a 355mm section width and a 12% aspect ratio, mounted on a 28-inch rim. Sidewall height works out to 42.6mm (1.68") and overall outside diameter is 796.4mm (31.35"). At highway speed the tire completes about 400 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 355/12R28 is unavailable, the closest same-diameter substitutes on the same rim are 345/12R28 and 365/12R28. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 355/12R28 you can upsize to 365/8R29 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 345/16R27 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 355/12R28 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 355/12R28

tire_size.no_vehicles_found