Section Width355 mm (14.0")
Aspect Ratio20%
Rim Diameter20"
Overall Diameter650 mm (25.6")
Sidewall Height71 mm
Circumference2042 mm
355/20R20 — Buy Tires

Everything to know about the 355/20R20 tire size

Size geometry

A 355/20R20 tire has a 355mm section width and a 20% aspect ratio, mounted on a 20-inch rim. Sidewall height works out to 71.0mm (2.80") and overall outside diameter is 650.0mm (25.59"). At highway speed the tire completes about 490 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 355/20R20 is unavailable, the closest same-diameter substitutes on the same rim are 345/21R20 and 365/19R20. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 355/20R20 you can upsize to 365/16R21 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 345/24R19 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 355/20R20 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 355/20R20

tire_size.no_vehicles_found