Section Width355 mm (14.0")
Aspect Ratio235%
Rim Diameter10"
Overall Diameter1923 mm (75.7")
Sidewall Height834 mm
Circumference6040 mm
355/235R10 — Buy Tires

Everything to know about the 355/235R10 tire size

Size geometry

A 355/235R10 tire has a 355mm section width and a 235% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 834.3mm (32.84") and overall outside diameter is 1922.5mm (75.69"). At highway speed the tire completes about 166 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 355/235R10 is unavailable, the closest same-diameter substitutes on the same rim are 345/242R10 and 365/229R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 355/235R10 you can upsize to 365/225R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 345/245R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 355/235R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 355/235R10

tire_size.no_vehicles_found