Section Width355 mm (14.0")
Aspect Ratio28%
Rim Diameter16"
Overall Diameter605 mm (23.8")
Sidewall Height99 mm
Circumference1901 mm
355/28R16 — Buy Tires

Everything to know about the 355/28R16 tire size

Size geometry

A 355/28R16 tire has a 355mm section width and a 28% aspect ratio, mounted on a 16-inch rim. Sidewall height works out to 99.4mm (3.91") and overall outside diameter is 605.2mm (23.83"). At highway speed the tire completes about 526 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 355/28R16 is unavailable, the closest same-diameter substitutes on the same rim are 345/29R16 and 365/27R16. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 355/28R16 you can upsize to 365/24R17 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 345/32R15 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 355/28R16 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 355/28R16

tire_size.no_vehicles_found