Section Width355 mm (14.0")
Aspect Ratio35%
Rim Diameter25"
Overall Diameter884 mm (34.8")
Sidewall Height124 mm
Circumference2776 mm
355/35R25 — Buy Tires

Everything to know about the 355/35R25 tire size

Size geometry

A 355/35R25 tire has a 355mm section width and a 35% aspect ratio, mounted on a 25-inch rim. Sidewall height works out to 124.3mm (4.89") and overall outside diameter is 883.5mm (34.78"). At highway speed the tire completes about 360 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 355/35R25 is unavailable, the closest same-diameter substitutes on the same rim are 345/36R25 and 365/34R25. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 355/35R25 you can upsize to 365/31R26 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 345/40R24 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 355/35R25 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 355/35R25

tire_size.no_vehicles_found