Section Width355 mm (14.0")
Aspect Ratio95%
Rim Diameter11"
Overall Diameter954 mm (37.6")
Sidewall Height337 mm
Circumference2997 mm
355/95R11 — Buy Tires

Everything to know about the 355/95R11 tire size

Size geometry

A 355/95R11 tire has a 355mm section width and a 95% aspect ratio, mounted on a 11-inch rim. Sidewall height works out to 337.3mm (13.28") and overall outside diameter is 953.9mm (37.56"). At highway speed the tire completes about 334 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 355/95R11 is unavailable, the closest same-diameter substitutes on the same rim are 345/98R11 and 365/92R11. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 355/95R11 you can upsize to 365/89R12 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 345/101R10 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 355/95R11 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 355/95R11

tire_size.no_vehicles_found