Section Width365 mm (14.4")
Aspect Ratio228%
Rim Diameter10"
Overall Diameter1918 mm (75.5")
Sidewall Height832 mm
Circumference6027 mm
365/228R10 — Buy Tires

Everything to know about the 365/228R10 tire size

Size geometry

A 365/228R10 tire has a 365mm section width and a 228% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 832.2mm (32.76") and overall outside diameter is 1918.4mm (75.53"). At highway speed the tire completes about 166 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 365/228R10 is unavailable, the closest same-diameter substitutes on the same rim are 355/234R10 and 375/222R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 365/228R10 you can upsize to 375/219R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 355/238R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 365/228R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 365/228R10

tire_size.no_vehicles_found