Section Width365 mm (14.4")
Aspect Ratio52%
Rim Diameter10"
Overall Diameter634 mm (24.9")
Sidewall Height190 mm
Circumference1991 mm
365/52R10 — Buy Tires

Everything to know about the 365/52R10 tire size

Size geometry

A 365/52R10 tire has a 365mm section width and a 52% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 189.8mm (7.47") and overall outside diameter is 633.6mm (24.94"). At highway speed the tire completes about 502 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 365/52R10 is unavailable, the closest same-diameter substitutes on the same rim are 355/53R10 and 375/51R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 365/52R10 you can upsize to 375/47R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 355/57R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 365/52R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 365/52R10

tire_size.no_vehicles_found