Section Width385 mm (15.2")
Aspect Ratio65%
Rim Diameter10"
Overall Diameter755 mm (29.7")
Sidewall Height250 mm
Circumference2370 mm
385/65R10 — Buy Tires

Everything to know about the 385/65R10 tire size

Size geometry

A 385/65R10 tire has a 385mm section width and a 65% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 250.3mm (9.85") and overall outside diameter is 754.5mm (29.70"). At highway speed the tire completes about 422 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 385/65R10 is unavailable, the closest same-diameter substitutes on the same rim are 375/67R10 and 395/63R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 385/65R10 you can upsize to 395/60R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 375/70R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 385/65R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 385/65R10

tire_size.no_vehicles_found