Section Width385 mm (15.2")
Aspect Ratio96%
Rim Diameter10"
Overall Diameter993 mm (39.1")
Sidewall Height370 mm
Circumference3120 mm
385/96R10 — Buy Tires

Everything to know about the 385/96R10 tire size

Size geometry

A 385/96R10 tire has a 385mm section width and a 96% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 369.6mm (14.55") and overall outside diameter is 993.2mm (39.10"). At highway speed the tire completes about 320 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 385/96R10 is unavailable, the closest same-diameter substitutes on the same rim are 375/99R10 and 395/94R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 385/96R10 you can upsize to 395/90R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 375/102R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 385/96R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 385/96R10

tire_size.no_vehicles_found