Section Width395 mm (15.6")
Aspect Ratio201%
Rim Diameter10"
Overall Diameter1842 mm (72.5")
Sidewall Height794 mm
Circumference5787 mm
395/201R10 — Buy Tires

Everything to know about the 395/201R10 tire size

Size geometry

A 395/201R10 tire has a 395mm section width and a 201% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 794.0mm (31.26") and overall outside diameter is 1841.9mm (72.52"). At highway speed the tire completes about 173 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 395/201R10 is unavailable, the closest same-diameter substitutes on the same rim are 385/206R10 and 405/196R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 395/201R10 you can upsize to 405/193R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 385/210R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 395/201R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 395/201R10

tire_size.no_vehicles_found