Section Width405 mm (15.9")
Aspect Ratio26%
Rim Diameter26"
Overall Diameter871 mm (34.3")
Sidewall Height105 mm
Circumference2736 mm
405/26R26 — Buy Tires

Everything to know about the 405/26R26 tire size

Size geometry

A 405/26R26 tire has a 405mm section width and a 26% aspect ratio, mounted on a 26-inch rim. Sidewall height works out to 105.3mm (4.15") and overall outside diameter is 871.0mm (34.29"). At highway speed the tire completes about 365 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 405/26R26 is unavailable, the closest same-diameter substitutes on the same rim are 395/27R26 and 415/25R26. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 405/26R26 you can upsize to 415/22R27 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 395/30R25 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 405/26R26 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 405/26R26

tire_size.no_vehicles_found