Section Width405 mm (15.9")
Aspect Ratio26%
Rim Diameter35"
Overall Diameter1100 mm (43.3")
Sidewall Height105 mm
Circumference3455 mm
405/26R35 — Buy Tires

Everything to know about the 405/26R35 tire size

Size geometry

A 405/26R35 tire has a 405mm section width and a 26% aspect ratio, mounted on a 35-inch rim. Sidewall height works out to 105.3mm (4.15") and overall outside diameter is 1099.6mm (43.29"). At highway speed the tire completes about 289 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 405/26R35 is unavailable, the closest same-diameter substitutes on the same rim are 395/27R35 and 415/25R35. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 405/26R35 you can upsize to 415/22R36 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 395/30R34 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 405/26R35 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 405/26R35

tire_size.no_vehicles_found