Section Width405 mm (15.9")
Aspect Ratio29%
Rim Diameter20"
Overall Diameter743 mm (29.3")
Sidewall Height117 mm
Circumference2334 mm
405/29R20 — Buy Tires

Everything to know about the 405/29R20 tire size

Size geometry

A 405/29R20 tire has a 405mm section width and a 29% aspect ratio, mounted on a 20-inch rim. Sidewall height works out to 117.5mm (4.62") and overall outside diameter is 742.9mm (29.25"). At highway speed the tire completes about 428 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 405/29R20 is unavailable, the closest same-diameter substitutes on the same rim are 395/30R20 and 415/28R20. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 405/29R20 you can upsize to 415/25R21 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 395/33R19 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 405/29R20 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 405/29R20

tire_size.no_vehicles_found