Section Width405 mm (15.9")
Aspect Ratio34%
Rim Diameter24"
Overall Diameter885 mm (34.8")
Sidewall Height138 mm
Circumference2780 mm
405/34R24 — Buy Tires

Everything to know about the 405/34R24 tire size

Size geometry

A 405/34R24 tire has a 405mm section width and a 34% aspect ratio, mounted on a 24-inch rim. Sidewall height works out to 137.7mm (5.42") and overall outside diameter is 885.0mm (34.84"). At highway speed the tire completes about 360 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 405/34R24 is unavailable, the closest same-diameter substitutes on the same rim are 395/35R24 and 415/33R24. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 405/34R24 you can upsize to 415/30R25 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 395/38R23 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 405/34R24 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 405/34R24

tire_size.no_vehicles_found