Section Width405 mm (15.9")
Aspect Ratio50%
Rim Diameter20"
Overall Diameter913 mm (35.9")
Sidewall Height203 mm
Circumference2868 mm
405/50R20 — Buy Tires

Everything to know about the 405/50R20 tire size

Size geometry

A 405/50R20 tire has a 405mm section width and a 50% aspect ratio, mounted on a 20-inch rim. Sidewall height works out to 202.5mm (7.97") and overall outside diameter is 913.0mm (35.94"). At highway speed the tire completes about 349 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 405/50R20 is unavailable, the closest same-diameter substitutes on the same rim are 395/51R20 and 415/49R20. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 405/50R20 you can upsize to 415/46R21 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 395/54R19 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 405/50R20 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 405/50R20

tire_size.no_vehicles_found