Section Width405 mm (15.9")
Aspect Ratio92%
Rim Diameter11"
Overall Diameter1025 mm (40.3")
Sidewall Height373 mm
Circumference3219 mm
405/92R11 — Buy Tires

Everything to know about the 405/92R11 tire size

Size geometry

A 405/92R11 tire has a 405mm section width and a 92% aspect ratio, mounted on a 11-inch rim. Sidewall height works out to 372.6mm (14.67") and overall outside diameter is 1024.6mm (40.34"). At highway speed the tire completes about 311 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 405/92R11 is unavailable, the closest same-diameter substitutes on the same rim are 395/94R11 and 415/90R11. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 405/92R11 you can upsize to 415/87R12 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 395/98R10 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 405/92R11 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 405/92R11

tire_size.no_vehicles_found