Section Width425 mm (16.7")
Aspect Ratio12%
Rim Diameter30"
Overall Diameter864 mm (34.0")
Sidewall Height51 mm
Circumference2714 mm
425/12R30 — Buy Tires

Everything to know about the 425/12R30 tire size

Size geometry

A 425/12R30 tire has a 425mm section width and a 12% aspect ratio, mounted on a 30-inch rim. Sidewall height works out to 51.0mm (2.01") and overall outside diameter is 864.0mm (34.02"). At highway speed the tire completes about 368 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 425/12R30 is unavailable, the closest same-diameter substitutes on the same rim are 415/12R30 and 435/12R30. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 425/12R30 you can upsize to 435/9R31 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 415/15R29 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 425/12R30 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 425/12R30

tire_size.no_vehicles_found