Section Width435 mm (17.1")
Aspect Ratio11%
Rim Diameter31"
Overall Diameter883 mm (34.8")
Sidewall Height48 mm
Circumference2774 mm
435/11R31 — Buy Tires

Everything to know about the 435/11R31 tire size

Size geometry

A 435/11R31 tire has a 435mm section width and a 11% aspect ratio, mounted on a 31-inch rim. Sidewall height works out to 47.9mm (1.88") and overall outside diameter is 883.1mm (34.77"). At highway speed the tire completes about 360 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 435/11R31 is unavailable, the closest same-diameter substitutes on the same rim are 425/11R31 and 445/11R31. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 435/11R31 you can upsize to 445/8R32 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 425/14R30 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 435/11R31 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 435/11R31

tire_size.no_vehicles_found