Section Width435 mm (17.1")
Aspect Ratio13%
Rim Diameter32"
Overall Diameter926 mm (36.5")
Sidewall Height57 mm
Circumference2909 mm
435/13R32 — Buy Tires

Everything to know about the 435/13R32 tire size

Size geometry

A 435/13R32 tire has a 435mm section width and a 13% aspect ratio, mounted on a 32-inch rim. Sidewall height works out to 56.5mm (2.23") and overall outside diameter is 925.9mm (36.45"). At highway speed the tire completes about 344 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 435/13R32 is unavailable, the closest same-diameter substitutes on the same rim are 425/13R32 and 445/13R32. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 435/13R32 you can upsize to 445/10R33 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 425/16R31 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 435/13R32 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 435/13R32

tire_size.no_vehicles_found