Section Width435 mm (17.1")
Aspect Ratio20%
Rim Diameter24"
Overall Diameter784 mm (30.9")
Sidewall Height87 mm
Circumference2462 mm
435/20R24 — Buy Tires

Everything to know about the 435/20R24 tire size

Size geometry

A 435/20R24 tire has a 435mm section width and a 20% aspect ratio, mounted on a 24-inch rim. Sidewall height works out to 87.0mm (3.43") and overall outside diameter is 783.6mm (30.85"). At highway speed the tire completes about 406 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 435/20R24 is unavailable, the closest same-diameter substitutes on the same rim are 425/20R24 and 445/20R24. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 435/20R24 you can upsize to 445/17R25 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 425/23R23 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 435/20R24 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 435/20R24

tire_size.no_vehicles_found