Section Width435 mm (17.1")
Aspect Ratio80%
Rim Diameter14"
Overall Diameter1052 mm (41.4")
Sidewall Height348 mm
Circumference3304 mm
435/80R14 — Buy Tires

Everything to know about the 435/80R14 tire size

Size geometry

A 435/80R14 tire has a 435mm section width and a 80% aspect ratio, mounted on a 14-inch rim. Sidewall height works out to 348.0mm (13.70") and overall outside diameter is 1051.6mm (41.40"). At highway speed the tire completes about 303 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 435/80R14 is unavailable, the closest same-diameter substitutes on the same rim are 425/82R14 and 445/78R14. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 435/80R14 you can upsize to 445/75R15 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 425/85R13 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 435/80R14 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 435/80R14

tire_size.no_vehicles_found