Section Width475 mm (18.7")
Aspect Ratio28%
Rim Diameter24"
Overall Diameter876 mm (34.5")
Sidewall Height133 mm
Circumference2751 mm
475/28R24 — Buy Tires

Everything to know about the 475/28R24 tire size

Size geometry

A 475/28R24 tire has a 475mm section width and a 28% aspect ratio, mounted on a 24-inch rim. Sidewall height works out to 133.0mm (5.24") and overall outside diameter is 875.6mm (34.47"). At highway speed the tire completes about 364 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 475/28R24 is unavailable, the closest same-diameter substitutes on the same rim are 465/29R24 and 485/27R24. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 475/28R24 you can upsize to 485/25R25 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 465/31R23 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 475/28R24 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 475/28R24

tire_size.no_vehicles_found