Section Width485 mm (19.1")
Aspect Ratio37%
Rim Diameter20"
Overall Diameter867 mm (34.1")
Sidewall Height179 mm
Circumference2723 mm
485/37R20 — Buy Tires

Everything to know about the 485/37R20 tire size

Size geometry

A 485/37R20 tire has a 485mm section width and a 37% aspect ratio, mounted on a 20-inch rim. Sidewall height works out to 179.4mm (7.06") and overall outside diameter is 866.9mm (34.13"). At highway speed the tire completes about 367 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 485/37R20 is unavailable, the closest same-diameter substitutes on the same rim are 475/38R20 and 495/36R20. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 485/37R20 you can upsize to 495/34R21 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 475/40R19 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 485/37R20 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 485/37R20

tire_size.no_vehicles_found