Section Width485 mm (19.1")
Aspect Ratio49%
Rim Diameter24"
Overall Diameter1085 mm (42.7")
Sidewall Height238 mm
Circumference3408 mm
485/49R24 — Buy Tires

Everything to know about the 485/49R24 tire size

Size geometry

A 485/49R24 tire has a 485mm section width and a 49% aspect ratio, mounted on a 24-inch rim. Sidewall height works out to 237.7mm (9.36") and overall outside diameter is 1084.9mm (42.71"). At highway speed the tire completes about 293 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 485/49R24 is unavailable, the closest same-diameter substitutes on the same rim are 475/50R24 and 495/48R24. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 485/49R24 you can upsize to 495/45R25 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 475/53R23 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 485/49R24 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 485/49R24

tire_size.no_vehicles_found