Section Width495 mm (19.5")
Aspect Ratio28%
Rim Diameter20"
Overall Diameter785 mm (30.9")
Sidewall Height139 mm
Circumference2467 mm
495/28R20 — Buy Tires

Everything to know about the 495/28R20 tire size

Size geometry

A 495/28R20 tire has a 495mm section width and a 28% aspect ratio, mounted on a 20-inch rim. Sidewall height works out to 138.6mm (5.46") and overall outside diameter is 785.2mm (30.91"). At highway speed the tire completes about 405 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 495/28R20 is unavailable, the closest same-diameter substitutes on the same rim are 485/29R20 and 505/27R20. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 495/28R20 you can upsize to 505/25R21 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 485/31R19 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 495/28R20 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 495/28R20

tire_size.no_vehicles_found