Section Width535 mm (21.1")
Aspect Ratio62%
Rim Diameter10"
Overall Diameter917 mm (36.1")
Sidewall Height332 mm
Circumference2882 mm
535/62R10 — Buy Tires

Everything to know about the 535/62R10 tire size

Size geometry

A 535/62R10 tire has a 535mm section width and a 62% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 331.7mm (13.06") and overall outside diameter is 917.4mm (36.12"). At highway speed the tire completes about 347 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 535/62R10 is unavailable, the closest same-diameter substitutes on the same rim are 525/63R10 and 545/61R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 535/62R10 you can upsize to 545/59R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 525/66R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 535/62R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 535/62R10

tire_size.no_vehicles_found