Section Width605 mm (23.8")
Aspect Ratio42%
Rim Diameter25"
Overall Diameter1143 mm (45.0")
Sidewall Height254 mm
Circumference3591 mm
605/42R25 — Buy Tires

Everything to know about the 605/42R25 tire size

Size geometry

A 605/42R25 tire has a 605mm section width and a 42% aspect ratio, mounted on a 25-inch rim. Sidewall height works out to 254.1mm (10.00") and overall outside diameter is 1143.2mm (45.01"). At highway speed the tire completes about 278 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 605/42R25 is unavailable, the closest same-diameter substitutes on the same rim are 595/43R25 and 615/41R25. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 605/42R25 you can upsize to 615/39R26 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 595/45R24 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 605/42R25 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 605/42R25

tire_size.no_vehicles_found