Section Width655 mm (25.8")
Aspect Ratio41%
Rim Diameter10"
Overall Diameter791 mm (31.1")
Sidewall Height269 mm
Circumference2485 mm
655/41R10 — Buy Tires

Everything to know about the 655/41R10 tire size

Size geometry

A 655/41R10 tire has a 655mm section width and a 41% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 268.6mm (10.57") and overall outside diameter is 791.1mm (31.15"). At highway speed the tire completes about 402 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 655/41R10 is unavailable, the closest same-diameter substitutes on the same rim are 645/42R10 and 665/40R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 655/41R10 you can upsize to 665/38R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 645/44R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 655/41R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 655/41R10

tire_size.no_vehicles_found