Section Width675 mm (26.6")
Aspect Ratio28%
Rim Diameter22"
Overall Diameter937 mm (36.9")
Sidewall Height189 mm
Circumference2943 mm
675/28R22 — Buy Tires

Everything to know about the 675/28R22 tire size

Size geometry

A 675/28R22 tire has a 675mm section width and a 28% aspect ratio, mounted on a 22-inch rim. Sidewall height works out to 189.0mm (7.44") and overall outside diameter is 936.8mm (36.88"). At highway speed the tire completes about 340 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 675/28R22 is unavailable, the closest same-diameter substitutes on the same rim are 665/28R22 and 685/28R22. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 675/28R22 you can upsize to 685/26R23 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 665/30R21 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 675/28R22 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 675/28R22

tire_size.no_vehicles_found