Section Width695 mm (27.4")
Aspect Ratio55%
Rim Diameter10"
Overall Diameter1019 mm (40.1")
Sidewall Height382 mm
Circumference3200 mm
695/55R10 — Buy Tires

Everything to know about the 695/55R10 tire size

Size geometry

A 695/55R10 tire has a 695mm section width and a 55% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 382.3mm (15.05") and overall outside diameter is 1018.5mm (40.10"). At highway speed the tire completes about 313 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 695/55R10 is unavailable, the closest same-diameter substitutes on the same rim are 685/56R10 and 705/54R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 695/55R10 you can upsize to 705/52R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 685/58R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 695/55R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 695/55R10

tire_size.no_vehicles_found