Section Width695 mm (27.4")
Aspect Ratio62%
Rim Diameter10"
Overall Diameter1116 mm (43.9")
Sidewall Height431 mm
Circumference3505 mm
695/62R10 — Buy Tires

Everything to know about the 695/62R10 tire size

Size geometry

A 695/62R10 tire has a 695mm section width and a 62% aspect ratio, mounted on a 10-inch rim. Sidewall height works out to 430.9mm (16.96") and overall outside diameter is 1115.8mm (43.93"). At highway speed the tire completes about 285 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 695/62R10 is unavailable, the closest same-diameter substitutes on the same rim are 685/63R10 and 705/61R10. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 695/62R10 you can upsize to 705/59R11 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 685/65R9 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 695/62R10 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 695/62R10

tire_size.no_vehicles_found