Section Width725 mm (28.5")
Aspect Ratio12%
Rim Diameter33"
Overall Diameter1012 mm (39.9")
Sidewall Height87 mm
Circumference3180 mm
725/12R33 — Buy Tires

Everything to know about the 725/12R33 tire size

Size geometry

A 725/12R33 tire has a 725mm section width and a 12% aspect ratio, mounted on a 33-inch rim. Sidewall height works out to 87.0mm (3.43") and overall outside diameter is 1012.2mm (39.85"). At highway speed the tire completes about 314 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 725/12R33 is unavailable, the closest same-diameter substitutes on the same rim are 715/12R33 and 735/12R33. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 725/12R33 you can upsize to 735/10R34 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 715/14R32 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 725/12R33 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 725/12R33

tire_size.no_vehicles_found