Section Width725 mm (28.5")
Aspect Ratio13%
Rim Diameter33"
Overall Diameter1027 mm (40.4")
Sidewall Height94 mm
Circumference3225 mm
725/13R33 — Buy Tires

Everything to know about the 725/13R33 tire size

Size geometry

A 725/13R33 tire has a 725mm section width and a 13% aspect ratio, mounted on a 33-inch rim. Sidewall height works out to 94.3mm (3.71") and overall outside diameter is 1026.7mm (40.42"). At highway speed the tire completes about 310 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 725/13R33 is unavailable, the closest same-diameter substitutes on the same rim are 715/13R33 and 735/13R33. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 725/13R33 you can upsize to 735/11R34 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 715/15R32 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 725/13R33 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 725/13R33

tire_size.no_vehicles_found