Section Width725 mm (28.5")
Aspect Ratio14%
Rim Diameter26"
Overall Diameter863 mm (34.0")
Sidewall Height102 mm
Circumference2712 mm
725/14R26 — Buy Tires

Everything to know about the 725/14R26 tire size

Size geometry

A 725/14R26 tire has a 725mm section width and a 14% aspect ratio, mounted on a 26-inch rim. Sidewall height works out to 101.5mm (4.00") and overall outside diameter is 863.4mm (33.99"). At highway speed the tire completes about 369 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 725/14R26 is unavailable, the closest same-diameter substitutes on the same rim are 715/14R26 and 735/14R26. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 725/14R26 you can upsize to 735/12R27 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 715/16R25 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 725/14R26 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 725/14R26

tire_size.no_vehicles_found