Section Width725 mm (28.5")
Aspect Ratio16%
Rim Diameter19"
Overall Diameter715 mm (28.1")
Sidewall Height116 mm
Circumference2245 mm
725/16R19 — Buy Tires

Everything to know about the 725/16R19 tire size

Size geometry

A 725/16R19 tire has a 725mm section width and a 16% aspect ratio, mounted on a 19-inch rim. Sidewall height works out to 116.0mm (4.57") and overall outside diameter is 714.6mm (28.13"). At highway speed the tire completes about 445 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 725/16R19 is unavailable, the closest same-diameter substitutes on the same rim are 715/16R19 and 735/16R19. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 725/16R19 you can upsize to 735/14R20 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 715/18R18 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 725/16R19 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 725/16R19

tire_size.no_vehicles_found