Section Width725 mm (28.5")
Aspect Ratio25%
Rim Diameter26"
Overall Diameter1023 mm (40.3")
Sidewall Height181 mm
Circumference3214 mm
725/25R26 — Buy Tires

Everything to know about the 725/25R26 tire size

Size geometry

A 725/25R26 tire has a 725mm section width and a 25% aspect ratio, mounted on a 26-inch rim. Sidewall height works out to 181.3mm (7.14") and overall outside diameter is 1022.9mm (40.27"). At highway speed the tire completes about 311 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 725/25R26 is unavailable, the closest same-diameter substitutes on the same rim are 715/25R26 and 735/25R26. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 725/25R26 you can upsize to 735/23R27 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 715/27R25 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 725/25R26 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 725/25R26

tire_size.no_vehicles_found