Section Width725 mm (28.5")
Aspect Ratio30%
Rim Diameter21"
Overall Diameter968 mm (38.1")
Sidewall Height218 mm
Circumference3042 mm
725/30R21 — Buy Tires

Everything to know about the 725/30R21 tire size

Size geometry

A 725/30R21 tire has a 725mm section width and a 30% aspect ratio, mounted on a 21-inch rim. Sidewall height works out to 217.5mm (8.56") and overall outside diameter is 968.4mm (38.13"). At highway speed the tire completes about 329 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 725/30R21 is unavailable, the closest same-diameter substitutes on the same rim are 715/30R21 and 735/30R21. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 725/30R21 you can upsize to 735/28R22 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 715/32R20 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 725/30R21 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 725/30R21

tire_size.no_vehicles_found