Section Width725 mm (28.5")
Aspect Ratio34%
Rim Diameter16"
Overall Diameter899 mm (35.4")
Sidewall Height247 mm
Circumference2826 mm
725/34R16 — Buy Tires

Everything to know about the 725/34R16 tire size

Size geometry

A 725/34R16 tire has a 725mm section width and a 34% aspect ratio, mounted on a 16-inch rim. Sidewall height works out to 246.5mm (9.70") and overall outside diameter is 899.4mm (35.41"). At highway speed the tire completes about 354 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 725/34R16 is unavailable, the closest same-diameter substitutes on the same rim are 715/34R16 and 735/34R16. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 725/34R16 you can upsize to 735/32R17 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 715/36R15 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 725/34R16 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 725/34R16

tire_size.no_vehicles_found