Section Width725 mm (28.5")
Aspect Ratio37%
Rim Diameter24"
Overall Diameter1146 mm (45.1")
Sidewall Height268 mm
Circumference3601 mm
725/37R24 — Buy Tires

Everything to know about the 725/37R24 tire size

Size geometry

A 725/37R24 tire has a 725mm section width and a 37% aspect ratio, mounted on a 24-inch rim. Sidewall height works out to 268.3mm (10.56") and overall outside diameter is 1146.1mm (45.12"). At highway speed the tire completes about 278 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 725/37R24 is unavailable, the closest same-diameter substitutes on the same rim are 715/38R24 and 735/36R24. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 725/37R24 you can upsize to 735/35R25 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 715/39R23 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 725/37R24 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 725/37R24

tire_size.no_vehicles_found