725/43R18 Tire Size Specifications
This tire size 725/43R18 fits 0 vehicles in our database.
Everything to know about the 725/43R18 tire size
Size geometry
A 725/43R18 tire has a 725mm section width and a 43% aspect ratio, mounted on a 18-inch rim. Sidewall height works out to 311.8mm (12.27") and overall outside diameter is 1080.7mm (42.55"). At highway speed the tire completes about 295 revolutions per kilometre â your speedometer and odometer were calibrated against this number.
Direct substitute sizes
If 725/43R18 is unavailable, the closest same-diameter substitutes on the same rim are 715/44R18 and 735/42R18. Both keep your speedometer reading within 1% â safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.
Plus / minus sizing options
For a 725/43R18 you can upsize to 735/41R19 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 715/45R17 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.
Vehicle compatibility
0 vehicles in our database run the 725/43R18 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance â match these specs to your wheel before purchasing tires.
Vehicles Using 725/43R18
tire_size.no_vehicles_found