Section Width725 mm (28.5")
Aspect Ratio47%
Rim Diameter12"
Overall Diameter986 mm (38.8")
Sidewall Height341 mm
Circumference3099 mm
725/47R12 — Buy Tires

Everything to know about the 725/47R12 tire size

Size geometry

A 725/47R12 tire has a 725mm section width and a 47% aspect ratio, mounted on a 12-inch rim. Sidewall height works out to 340.8mm (13.42") and overall outside diameter is 986.3mm (38.83"). At highway speed the tire completes about 323 revolutions per kilometre — your speedometer and odometer were calibrated against this number.

Direct substitute sizes

If 725/47R12 is unavailable, the closest same-diameter substitutes on the same rim are 715/48R12 and 735/46R12. Both keep your speedometer reading within 1% — safe for daily use, ABS, and stability control. Always verify load and speed ratings before swapping.

Plus / minus sizing options

For a 725/47R12 you can upsize to 735/45R13 (plus-one) to fit a larger wheel without changing the speedometer reading, or downsize to 715/49R11 (minus-one) for a softer ride or winter setup. Both stay inside the Âą3% diameter tolerance that ABS and TPMS systems expect.

Vehicle compatibility

0 vehicles in our database run the 725/47R12 tire size from the factory. Aftermarket fitment depends on rim width, offset, and clearance — match these specs to your wheel before purchasing tires.

Vehicles Using 725/47R12

tire_size.no_vehicles_found